Filters
Close

Fascia & Soffit Accessories

Display per page

MFP Ogee PVC External Angle 300mm

EOA2Range
Ogee gutter angles are used at the corners of the installation. The best way to understand the difference between an internal and an external corner is to remember that the flat side of the fitting always fits against the fascia board.
€5.36 incl vat

MFP Ogee PVC Fascia Joiner 300mm

EOJ1Range
The ogee fascia system is a traditional ā€˜sā€™ curved style which includes the 10mm thick fascia board and a full range of accessories to ensure a neat and professional installation. The ogee fascia system comes in White or Black.
€4.03 incl vat

MFP Ogee PVC Internal Angle 300mm

EOA1Range
Ogee gutter angles are used at the corners of the installation. Internal Angles are most often found where two gutters meet at the bottom of a valley.
€5.36 incl vat

MFP PVC Double H Channel 5m

EDC1Range
The H channels are mounted to the posts to form a frame for which the lattice panel can be put into.
€12.55 incl vat

MFP PVC Finial

EF1Range
Finials are a more decorative way of covering the joint of the roof. To enable the bargeboard system to expand and contract correctly in a different range of temperatures, one side of the finial should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.
€6.24 incl vat

MFP PVC Single J Channel 5m

ESC1Range
The PVC Single J Channel is 5 metres in length and available in a range of different colours. Providing a professional neat finish, this is easily to handle, install, and cut to the required length if necessary.
€9.02 incl vat

40mm Polytop Nails (Box of 250)

POLYB40Range
40mm Polytop Nails are manufactured for use with fascia and soffit boards providing a quality finish. This comes in a pack of 250 in either black or white.
€20.80 incl vat