Joint Sealants & Filler Boards
FOAMFBR15
The Foam Backer Cord FBR15 15mm x 500m is a non absorbent compressible white closed cell polyethylene foam backup material. It is recommended to use to reduce the depth of joints in construction and glazing use and to create a backstop to allow proper sealant tooling in expansion joints.
FOAMSTRIPRange
The Joint Foam Coil is a closed cell polyethylene foam used as a joint filler, joint former, non-load transfer filler, grout check, stop-end, insulant, and many more applications. It is compressible yet semi-rigid, strong, and non-absorbent. It is light, clean, and easy to use and it can be used on all normal building surfaces. It is highly resistant to most site chemicals and oils with weathering and ozone resistance. Sizes 10mm x 100mm x 10m and 10mm x 150mm x 10m.
TOFF5
Toffolo Expansion Joint (Grey) 5m functions as a screed form, control joint, and unbounded construction joint. It improves the levelness of concrete slabs while eliminating the need for saw-cutting control joints.
FLEX8412Range
Fillaboard Strip is a high quality performance expansion joint for concrete applications. This is manufactured from specially formulated impregnated fibreboard, with a minimum 10% bitumen content. The strips are supplied in sizes of 2440mm (length) x 12mm (thickness) with a choice of 100 and 150 millimetre widths.
TOPSTRIP4
Expandafoam is a flexible, readily compressible, closed-cell polyethylene joint filler for use as an expansion joint filler in brick and blockwork, isolation joints and hinge joints. This 100mm wide strip is 10mm thick and supplied in rolls of 15m.
EXPSTRIP
Plastic Expansion Strip 100mm deep which is suitable for use in a range of applications. This strip allows for thermal expansion or compression between joints. Helps to minimise distortion and protect against damage to the joint. Supplied in 6m lengths which can be trimmed to size.
NITOSEAL600G
Nitoseal MS600 is a one part medium modulus sealant based on hybrid silyl modified polyether technology. It has a fast rate of cure and forms a tough, highly durable and water resistant elastomer. Suitable for sealing movement joints in buildings and civil engineering structures including joints that will be subject to intermittent or permanent immersion.